Libec LX7 Tripod System
- LX7 fluid head with fixed counterbalance and fixed drag, 75mm bowl
- 8 kg (17.5 lb) payload on 2-stage aluminum legs
- 56–166 cm height range, sliding plate with ±40 mm travel
- Delivered across Bangladesh from Dhaka
- Level the 75mm bowl before mounting the camera.
- Use the sliding plate to balance tilt hands-off.
- Tighten the leg locks fully before pan or tilt.
You may also like
You may also like these with this Libec LX7 Tripod System
Related Products
Discover products curated just for you
Description
The LX7 head on legs joined by a floor spreader, so it starts lower and keeps a fixed footprint on a flat floor. The Libec LX7 pairs the LX7 fluid head with two-stage aluminium legs and an SP-2B floor spreader.
Libec LX7 price in Bangladesh: ৳70,000 at Momi Enterprise. সারা বাংলাদেশে ডেলিভারি।
Who the LX7 suits in Bangladesh
Studio, interview and live-stream setups on flat floors, broadcast, mosque and church crews who leave the camera in one place for hours, and videographers who want a low starting height for product or seated shots. The LX7 head carries up to 8 kg with fixed counterbalance and fixed drag. It tilts from +90° to −80° and balances the camera on a sliding plate with ±40 mm of travel, fixed by a 1/4-inch screw with a video pin; a spare 3/8-inch screw is supplied. The legs reach 56 to 166 cm and hold the head in a 75 mm bowl. If you shoot on stairs, grass or stage edges, the LX7 M has the same head on legs with a mid-level spreader instead.
Libec LX7 key specifications
- LX7 fluid head; payload 8 kg (17.5 lb)
- Fixed counterbalance and fixed drag; tilt +90° to −80°
- Sliding plate ±40 mm; 1/4-inch screw with video pin
- 75 mm bowl; 2-stage aluminium legs; 56–166 cm
- SP-2B floor spreader; RC-20 case
For uneven ground, see the Libec LX7 M. For heavier camera rigs, the Libec LX10 is the step up.
Momi Enterprise supplies from 83/A Bangabandhu National Stadium Market, Dhaka, and delivers across Bangladesh; delivery charges show at checkout. Call us to check availability and the warranty terms before you order.
Key Features
- Fluid head: LX7 head, fixed counterbalance and fixed drag — buttery-smooth 360° pans.
- Bowl size: 75mm half-ball — fast horizon leveling.
- Payload: 8 kg (17.5 lb) — carries cinema-rigged mirrorless, DSLR cages and camcorders.
- Legs: Libec RT30B, 2-stage aluminum — fast deploy on location.
- Height range: 56 cm to 166 cm — low-angle to eye-level in one kit.
- Sliding plate: ±40 mm travel — balance the camera hands-off.
- Tripod weight: 5.5 kg — transportable between locations.
- In the box: RT30B tripod legs, LX7 fluid head, pan bar, sliding QR plate, SP-2B floor spreader, RC-20 carry case.
Specifications
| Specification | Value |
|---|---|
| Model | Libec LX7 Tripod System |
| Head type | LX7 fluid head; fixed counterbalance and fixed drag |
| Bowl size | 75mm half-ball |
| Payload capacity | 8 kg (17.5 lb) |
| Legs | Libec RT30B, 2-stage aluminum |
| Height range | 56 cm – 166 cm |
| Tripod weight | 5.5 kg |
| Sliding camera plate | ±40 mm travel |
| Spreader | Floor spreader included |
| Pan bar | Included |
What's in the Box
- Libec RT30B tripod legs (2-stage aluminum)
- LX7 fluid pan and tilt head (75mm bowl)
- Sliding quick release camera plate
- Floor spreader
- Pan bar
- Padded carry case
Expert Tips
Level the bowl first, mount the camera second
Balance with the sliding plate, not the head drag
Slide the quick release plate forward or back until the camera holds its tilt angle. The LX7's counterbalance and drag are both fixed, so the plate position is what gives it its hands-off tilt hold; check your camera against Libec's LX7 counterbalance chart.
Respect the 8 kg payload ceiling
The LX7 head is rated at 8 kg. If you are adding a matte-box, follow-focus, external monitor and wireless receiver to a cinema camera, weigh the rig first.
Keep the sliding plate track clean
A dusty plate track causes uneven plate seating, which causes wobble that looks like a bad head. A quick brush + lens cloth between shoots keeps the plate sliding true.
Plan the upgrade path
If your gear grows past 8 kg or you move to heavier ENG / cinema rigs, the LX10 (16 kg, 100 mm bowl) is the LX-series step up. For studio/pedestal workflows, see Pedestal Systems for a natural step up.
Detailed Description
The Libec LX7 Tripod System is a 75mm bowl, fluid-head video tripod by Libec Tripods, built for Bangladesh broadcast studios, wedding videographers and YouTube creators who need broadcast-grade stability without the full-pedestal footprint. With an 8kg (17.5 lb) payload, 2-stage aluminum legs and the LX7 fluid head with fixed counterbalance and fixed drag, the LX7 replaces wobbly handheld rigs and cheap DSLR tripods on tier-one BD live-stream, interview and wedding shoots. Listed under Professional Camera Tripods in our catalog.
The LX7 pairs a 75mm half-ball bowl with the LX7 fluid pan and tilt head — the combination that keeps horizons dead-level and pans buttery across a 360° sweep, even with a cinema-rigged mirrorless or camcorder on top.
Key Specifications
| Specification | Value |
|---|---|
| Model | Libec LX7 Tripod System |
| Head type | LX7 fluid head; fixed counterbalance and fixed drag |
| Bowl size | 75mm half-ball |
| Payload capacity | 8 kg (17.5 lb) |
| Legs | Libec RT30B, 2-stage aluminum |
| Height range | 56 cm – 166 cm |
| Tripod weight | 5.5 kg |
| Sliding camera plate | ±40 mm travel |
| Spreader | Floor spreader included |
| Pan bar | Included |
What's in the Box
- Libec RT30B tripod legs (2-stage aluminum)
- LX7 fluid pan and tilt head (75mm bowl)
- Sliding quick release camera plate
- Floor spreader
- Pan bar
- Padded carry case
How to Use the Libec LX7
Initial setup
Extend the 2-stage aluminum legs to your working height (56–166 cm), tighten the leg locks firmly, and seat the floor spreader. Drop the fluid head into the 75mm bowl, then use the half-ball leveling clamp underneath to bring the bubble dead-centre before mounting any camera.
For DSLR and mirrorless video
Slide a DSLR or mirrorless body onto the quick release plate, then use the ±40 mm sliding plate travel to shift the rig forward or back until the lens/body balance sits over the bowl pivot. Counterbalance on the LX7 is fixed, so check that the camera holds its tilt angle hands-off (Libec publishes an LX7 counterbalance chart) — that's the point where your pans turn cinematic.
For camcorders and broadcast rigs
At 8 kg payload the LX7 handles most professional camcorders, cinema cameras with matte-box + follow-focus, or a mirrorless body in a full cage with external monitor and wireless audio receiver. For interview setups, lock tilt at neutral and pan with the pan bar — drag is fixed on the LX7 head, so it cannot be dialled up or down.
How It Compares
Choosing between the Libec LX-series and the TH / 650EX lines depends on your payload and height ceiling. The table below covers the LX7 against the siblings listed in the same catalog.
| Model | Payload | Max height | Bowl | Best for |
|---|---|---|---|---|
| Libec LX7 | 8 kg | 166 cm | 75mm | DSLR/mirrorless video, run-and-gun broadcast |
| Libec LX7 M | 8 kg | 165.5 cm | 75mm | Uneven ground, with a mid-level spreader |
| Libec LX10 | 16 kg | 173.5 cm | 100mm | Heavier cinema rigs, ENG shoulder cameras |
| Libec TH-X | 4 kg | 159 cm | 65mm ball + flat base | Lighter DSLR kits, entry-level videographers |
If you set up on stairs, grass or uneven floors, the Libec LX7 M Tripod System with a mid-level spreader is the natural peer. For heavier cinema or ENG rigs, step up to the Libec LX10 Tripod System. For smaller DSLR-only kits, the Libec TH-X Tripod System is a lighter-duty pick from the same brand.
Care and Storage
- Wipe down the legs and head after coastal or monsoon shoots — salt air and humidity corrode aluminum joints over time.
- Store the tripod in its padded carry case with a silica-gel sachet; Dhaka humidity can pit unfinished metal surfaces within a season.
- Tighten the leg locks and bowl clamp every few months — they loosen with use and transport vibration.
- Keep the sliding plate track clean of dust; a stiff brush + lens cloth is enough.
Delivery and Support
The Libec LX7 ships from 83/A, Bangabandhu National Stadium Market, Dhaka, and we deliver across Bangladesh. Call us to check availability and the warranty terms before you order. Browse the full Tripods & Head Systems catalog if you need to pair the LX7 with an upgrade path or an accessory.
Frequently Asked Questions
What is the payload capacity of the Libec LX7 tripod?
The Libec LX7 supports up to 8 kg (17.5 lb) on its LX7 fluid head. Libec makes it for large hand-held cameras and large camcorders; the counterbalance is fixed, so weigh a rigged camera, with its cage, matte-box, monitor and receiver, and check it against Libec's LX7 counterbalance chart.
Libec LX7 কি DSLR এবং mirrorless camera দুটোর জন্যই ভালো?
হ্যাঁ — 8 kg payload এবং ±40 mm sliding plate থাকায় DSLR বা mirrorless body balance করা যায়; counterbalance fixed, তাই আপনার camera Libec এর LX7 counterbalance chart এ মিলিয়ে নিন। 75mm bowl fluid head smooth pan এবং tilt দেয়, যা wedding videography, YouTube interview এবং broadcast shoot — সব ধরনের work এর জন্য suitable।
Does the Libec LX7 come with a carrying case?
Yes. The Libec LX7 box includes a padded carry case along with the tripod legs, fluid head, sliding quick release plate, floor spreader and a pan bar — so the kit is ready to mobilize between locations without sourcing extra bags.
Libec LX7 vs Libec 650EX — কোনটা নেব?
The LX7 has a 75mm bowl and 8 kg payload; the Libec 650EX Tripod System is a lighter-duty pick with a 65mm half-ball and a 3 kg payload, aimed at mirrorless and DSLR workflows. If you shoot with a cinema-rigged mirrorless, camcorder or anything over 3 kg, the LX7's 8 kg payload wins. If your gear stays under 3 kg, the 650EX is lighter to carry.
What is the maximum height of the Libec LX7?
Extended with the 2-stage aluminum legs and floor spreader at working position, the LX7 reaches 166 cm, and its minimum height is 56 cm. That gives eye-level framing for standing interviews and low-angle product shots from the same kit.
Related Products
- Libec LX7 M Tripod System — same bowl and payload with a mid-level spreader for uneven ground.
- Libec LX10 Tripod System — step-up LX-series model for heavier cinema and ENG rigs.
- Libec TH-X Tripod System — lighter, entry-tier pick for DSLR-only videographers.
- Monopods — pair or swap with a monopod for run-and-gun wedding and event work.
Customer Reviews
No reviews yet
No reviews yet
Be the first to review Libec LX7 Tripod System!