ATEM 2 M/E Advanced Panel 20

The Blackmagic ATEM 2 M/E Advanced Panel 20 is a 2 M/E hardware control surface by Blackmagic Design, built to drive 2 M/E ATEM live production switchers across 20 source buttons per M/E. With a real T-bar, joystick DVE positioner, per-button backlit LCDs and 4× 1G Ethernet loop-through, it lives in the same hardware-control family as the smaller ATEM 1 M/E Advanced Panel 10 and is stocked in Bangladesh by Momi Enterprise inside the Switchers catalogue.

Key Specifications

What's in the Box

• ATEM 2 M/E Advanced Panel 20
• 2× IEC AC power cables (one per redundant PSU inlet)
• Quick-start documentation
• Blackmagic ATEM Setup utility (manufacturer download)

How to Use ATEM 2 M/E Advanced Panel 20

Setup

Connect the panel to the same studio LAN as your 2 M/E ATEM switcher (for example the ATEM 2 M/E Constellation HD) using one of the 4× 1G Ethernet ports. Power up both PSU inlets, then run Blackmagic ATEM Setup over USB-C to assign the panel's IP and bind it to the switcher. Once paired, both M/E rows light up with their assigned source labels and the T-bar reflects the live transition position from the switcher.

For BD multi-camera live productions

BD wedding videographers, Dhaka TV studios and event live-stream teams typically run 6–12 cameras through a 2 M/E ATEM. Map your principal cameras (host, wide, audience, side) to row-1 of the panel, and your downstream sources (graphics, media player, lower-thirds, remote feed) to row-2. The per-button LCDs cut hunt-time during a fast cut — exactly what you need when a wedding ceremony or a live talk-show goes off-script.

For house-of-worship and event venues

For BD megachurch / mosque livestream rigs that run program + foldback + IMAG separately, the second M/E row drives the foldback bus while row-1 stays on program. Macros bound to softkeys cover scene changes (sermon → song → dua) without exposing the operator to a screenful of mouse menus.

How It Compares

Two comparisons matter for buyers shopping the Advanced Panel range. First, the in-catalogue sibling — the ATEM 1 M/E Advanced Panel 10 — and second, the larger-format Advanced Panel 40, mentioned by buyers but not stocked at Momi Enterprise.

Compatibility

The Advanced Panel 20 is purpose-built for 2 M/E ATEM switchers. The natural pairing in our catalogue is the ATEM 2 M/E Constellation HD. The panel will also drive single-M/E switchers — for example the ATEM 1 M/E Constellation HD, the ATEM Television Studio HD8, the ATEM Television Studio HD8 ISO and the Blackmagic Design ATEM Television Studio 4K8 — but only the first M/E row on the panel will be in active use. Always cross-check Blackmagic's official compatible-controllers list before committing on a new switcher pairing, since the official compatibility set is the source of truth and updates with firmware releases. Smaller, software-controlled units like the Blackmagic Design ATEM Mini Extreme are USB-software-driven and are not controllable by this hardware panel — useful as an entry-tier ATEM if you're scaling up later.

Care and Storage

• Mount the panel on a clean, level surface — desktop or rack — and leave clearance behind for the PSU inlets and Ethernet ports.
• Keep the operator surface dust-free; the buttons are illuminated and dust on the LCD area dulls the source label readout.
• Power down both PSU inlets before any cabling change. The panel is hot-pluggable for Ethernet but not for AC.
• Use a UPS-backed circuit on at least one of the two PSU inlets for broadcast reliability.
• Store firmware-update files locally on the production laptop — the USB-C update flow uses Blackmagic ATEM Setup and a panel-side reboot.

Delivery, Warranty and Support

Momi Enterprise imports the Blackmagic ATEM 2 M/E Advanced Panel 20 for the Bangladesh market and offers it under importer warranty applicable per policy. Cash on delivery (COD) is available alongside online payment, and we ship nationwide from our Dhaka inventory — সারা বাংলাদেশে ডেলিভারি, with same-city pickup at Bangabandhu National Stadium Market. Live broadcast hardware sometimes needs first-week setup help; our team has set up Advanced Panels on real BD productions and can walk you through ATEM Setup, IP assignment, redundant-PSU power planning and macro programming. For the wider Blackmagic hardware-panel range we also stock, browse Broadcast Converters & Switchers or the colour-grading sibling DaVinci Resolve Mini Panel.

Frequently Asked Questions

ATEM 2 M/E Advanced Panel 20 কোন ATEM switcher এর সাথে compatible?

This is a hardware control surface, not a switcher — it must pair with an ATEM switcher over Ethernet. The natural pairing is a 2 M/E ATEM such as the ATEM 2 M/E Constellation HD. Single-M/E ATEM models (Constellation HD, Television Studio HD8 / HD8 ISO, Television Studio 4K8) are also drivable, with only the first M/E row of the panel active. USB-driven ATEM Mini family units are NOT controllable by this panel. Always verify against Blackmagic's official compatible-controllers list before committing on a new pairing.

Does the ATEM 2 M/E Advanced Panel 20 need a separate ATEM switcher?

Yes. The panel has no video inputs or outputs — all switching, keying, audio mixing and program output happen on the ATEM switcher. The panel sends control commands over Ethernet and receives source labels + tally back. Without an ATEM switcher in the rig, the panel is inert.

ATEM 2 M/E Advanced Panel 20 কীভাবে network এ connect করবেন?

Use any of the four 1G Ethernet ports on the rear, plug it into the same studio LAN as your ATEM switcher, then run Blackmagic ATEM Setup over the USB-C port to assign the panel's IP and bind it to the switcher. Once bound, source labels push to the panel LCDs automatically and the T-bar mirrors the switcher's transition state. The remaining Ethernet ports are loop-through — chain a second panel or a multiview monitor into the same hop without a separate switch.

How many M/E rows does the ATEM 2 M/E Advanced Panel 20 have?

2 M/E rows, with 20 backlit source-select buttons per row, T-bar transition, joystick DVE positioner and a System Control display with softkeys for keyer, macro, media-player and audio recall.

ATEM 2 M/E Advanced Panel 20 firmware update কীভাবে করবেন?

Connect a laptop to the panel's USB-C port, run Blackmagic ATEM Setup, point the utility at the panel and apply the firmware bundled with your switcher's release. Update both the panel and the companion switcher in the same sitting — the panel speaks the protocol revision of its companion switcher, and a mismatch surfaces as ghost buttons or unresponsive softkeys.

Does the ATEM 2 M/E Advanced Panel 20 have redundant power supply?

Yes. The chassis carries two PSU inlets, both accepting universal AC. For broadcast-grade reliability, run them off two different circuits — one wall outlet and one UPS-backed feed — so a tripped breaker on one circuit does not take the desk down mid-show.

What is the difference between ATEM 2 M/E Advanced Panel 20 and Panel 40?

Both panels drive 2 M/E ATEM switchers and share the same T-bar, joystick, per-button LCDs, 4× GbE loop-through and redundant PSU layout. The difference is button density per M/E row: 20 source-select buttons on the Panel 20 versus 40 on the Panel 40. Choose the larger format only if your show genuinely exceeds 20 sources on a single bus, which is uncommon outside tier-1 broadcast OB workflows. Most BD studios, event-stream rigs and house-of-worship setups land within the 20-button budget.

ATEM 2 M/E Advanced Panel 20 rack-mount নাকি desktop?

The chassis sits flat as a desktop control surface and also fits broadcast desks and rack-friendly studio furniture. Plan clearance for the rear PSU inlets and the four Ethernet ports — these need straight-out cable runs without sharp bends, especially the redundant AC feeds.

ATEM 2 M/E Advanced Panel 20 BD তে warranty কতদিন?

Momi Enterprise imports this panel for the Bangladesh market under importer warranty applicable per policy. Exact terms are listed on the product page warranty field at the time of purchase. We support setup and first-fault triage from our Dhaka office; out-of-warranty servicing is handled per the same policy. সারা বাংলাদেশে ডেলিভারি এবং COD available।

ATEM Software Control এর জায়গায় এই hardware panel কেন use করবেন?

ATEM Software Control runs every switcher feature on a laptop, but live operators are slower with a mouse than with muscle memory. The Advanced Panel 20 gives you a real T-bar, a real joystick for DVE moves, dedicated keyer/macro/media buttons and per-button source LCDs — the operator stops looking at a screen and stays on the show. Software Control is fine for setup, rehearsal and small-show cuts; the hardware panel pays back its price the first time you run a live multi-camera show with a tight rundown.

ATEM 2 M/E Advanced Panel 20 দিয়ে কয়টা camera switch করা যায়?

Up to 20 sources per M/E row are accessible directly from the panel's source-select buttons, and the underlying 2 M/E ATEM switcher can carry more inputs than that — additional sources are reachable via shift / page softkeys. For typical BD productions (wedding, talk-show, concert, sermon livestream) the 20-button budget per bus is more than enough, with room left over for graphics, media player and a remote feed.

Related Products

• ATEM 2 M/E Constellation HD — the natural 2 M/E switcher pairing for this panel.
• ATEM 1 M/E Advanced Panel 10 — single-M/E sibling in the same hardware-panel family.
• ATEM Television Studio HD8 — compact 8-input live switcher, also drivable by this panel (first M/E row only).
• Blackmagic Design ATEM Television Studio 4K8 — 4K-tier compatible switcher for higher-resolution productions.

Browse all Switchers →